Faucet Repair & Replacement

Stop drips, restore water flow, and replace worn or outdated faucets with careful installation by Budget Heating & Plumbing Services.

A Small Faucet Problem Can Waste Water and Damage Cabinets

A dripping faucet is easy to ignore until the sound becomes constant, the handle becomes difficult to turn, or water begins collecting below the sink. Faucet problems can come from a worn cartridge, damaged seal, loose mounting hardware, corroded supply line, failing shutoff valve, or a connection that was not sealed correctly. The right repair depends on the faucet design, the condition of the surrounding plumbing, and whether replacement parts remain available.

Budget Heating & Plumbing Services repairs and replaces kitchen, bathroom, laundry, tub, shower, utility-sink, and outdoor faucets throughout Vancouver, Burnaby, Surrey, Coquitlam, Langley, North Vancouver, and surrounding Lower Mainland communities. Our plumber checks the fixture, supply connections, shutoff valves, mounting surface, and drainage area before recommending a repair or replacement.

Homeowners can supply a preferred faucet, or our team can help confirm that a selected fixture matches the sink configuration, hole spacing, water connections, and available clearance. The goal is a secure installation, smooth operation, dependable water flow, and no leaks at the fixture or below the counter.

Faucet Service Options

Repair the Faucet or Replace It?

Repair is often practical when the faucet body is in good condition and the problem is limited to a replaceable cartridge, washer, aerator, supply line, or mounting component. A repair can preserve a fixture that fits the space and still performs well.

Replacement is often the stronger option when corrosion is widespread, the finish is failing, the faucet body is cracked, internal parts are unavailable, or the fixture has developed repeated leaks. Replacement may also make sense during a sink or countertop update, or when a homeowner wants easier controls, a pull-down sprayer, or improved accessibility.

Our plumber explains the cause of the problem and the available paths before work begins. We do not treat every drip as a reason to replace the entire fixture.

Signs It Is Time to Call a Plumber

A Clear Plumbing Service Process

  1. 1. Describe the Problem: Tell us where the faucet is located, what it is doing, and whether you already have a replacement fixture.
  2. 2. Inspect the Fixture and Connections: We check the faucet, supply lines, shutoff valves, mounting hardware, sink surface, and nearby drainage area.
  3. 3. Review Repair or Replacement Options: You receive a clear explanation of the cause, the practical options, and the work required before proceeding.
  4. 4. Complete and Test the Work: We secure the fixture, reconnect the water supply, test hot and cold operation, inspect for leaks, and clean the work area.

Faucet Service Across the Lower Mainland

Older Vancouver and New Westminster homes may have aging shutoff valves or non-standard connections behind an otherwise simple faucet problem. Burnaby and Coquitlam homes often combine older plumbing with renovated kitchens or bathrooms. Condos in Richmond, Surrey, and North Vancouver may also require careful access and coordination when the fixture is installed in cabinetry with limited working space.

Budget Heating & Plumbing Services works across the Lower Mainland and Fraser Valley. Call 604-343-1985 or request a Free Estimate online for a faucet repair or replacement.

Frequently Asked Questions

Can a dripping faucet usually be repaired?

Many dripping faucets can be repaired when the body is sound and the correct cartridge, washer, seal, or valve component is available. We inspect the fixture and explain whether a repair is likely to provide a dependable result.

Can you install a faucet that I already purchased?

Yes. We can install a customer-supplied faucet after confirming that it matches the sink configuration, mounting holes, connections, and available clearance.

Why is my faucet leaking under the sink?

Common causes include a loose supply connection, damaged supply line, worn faucet hose, failing shutoff valve, or water travelling down from the faucet base. The exact source should be identified before parts are replaced.

Why does only one faucet have low water pressure?

Low flow at one faucet may come from a blocked aerator, debris in the cartridge, a kinked supply line, or a partially closed shutoff valve. If several fixtures are affected, the issue may be elsewhere in the plumbing system.

Do you replace shower and tub faucets?

Yes. We service accessible shower and tub controls, cartridges, trim, and compatible valve components. Some replacements require access behind the wall, which we review before work begins.

Should old shutoff valves be replaced with a new faucet?

A shutoff valve should be replaced when it leaks, will not close, is heavily corroded, or cannot provide dependable isolation. We inspect accessible valves during faucet work and explain any concern.

Which Lower Mainland areas do you serve for faucet work?

We serve Vancouver, Burnaby, Surrey, Coquitlam, Port Coquitlam, Port Moody, Richmond, New Westminster, Delta, Langley, the North Shore, and other listed service communities.

Get a Free Estimate or call 604-343-1985.